Poland has long seen the wrath of its people when it tried to test people. A lot has been done and said. If we see the corners of the history or the current diegesis then we can see that this movement has again been in the limelight. Homosexuality was decriminalized in 1932. But if you see the history then it has been an anathema. Homophobia is still very common in the bylanes of Poland thanks to the influence of Catholic Church in Polish public life.In 19th century, due to men being often absent (insurrections, exiles to Siberiaetc.), Polish women would often take on traditionally masculine tasks, such as household management. The social norms were more lax on the countryside, allowing women there to have more liberties than in the cities or in the Western Europe. This was the scenario in the 19 th century.
During the Nazi occupation of Poland in World War II gay and bisexual Poles were not a specifically persecuted category, and unlike gay and bisexual Germans were not punished by Article 175. They were, however, still persecuted and killed as Poles. Diaries, such as Z Auszwicu do Belsen by Marian Pankowski, Anus mundi by Wiesław Kielar are testimony to the experiences of gay prisoners during the war. Come to the 21st Century part
and 2001 was the year the first Pride Parade (Parada Równości) was held in Warsaw, attended by over 300 people. This was the first large-scale protest against homosexual discrimination.
While ahead of the 2015 Polish parliamentary election, the ruling Law and Justice (PiS) party took an anti-migrant stance, in the run-up to the 2019 Polish parliamentary election the party has focused on countering Western “LGBT ideology”. Several Polish municipalities and four Voivodeships made so-called “LGBT-free zone” declarations, partly in response to the signing of a declaration in support of LGBTQ rights by Warsaw mayor
In August 2019, multiple LGBT community members have
stated that they feel unsafe in Poland. Foreign funded NGO All Out organization launched a campaign to counter the attacks, with about 10,000 people signing a petition shortly after the campaign launch. 2019 saw a rise of
violence directed against Pride marches, including the attacks at the first Białystok Equality March and a bombing attempt made at a Lublin march, stopped by the police. While back in 2020 there has been a lot of political uproar during the ongoing episode. Three people accused of
hanging LGBT rainbow flags off statues in Warsaw have been arrested and charged. Polish police charged them
with desecrating monuments and offending religious feelings. Activists protesting against the anti-LGBT policies of President Andrzej Duda hung the flags off statues of Jesus Christ, the astronomer Copernicus and the Warsaw mermaid.
They also dressed them in pink face masks bearing the anarcho-queer symbol.
Prime Minister Mateusz Morawiecki denounced the activists, saying the statues symbolise values that are
important to millions of Poles.
Some of the of Polish opposition MPs wore the rainbow colors of the LGBT flag in protest against President Andrzej Duda at his swearing-in ceremony on Thursday. While some opposition leaders chose to boycott Duda’s inauguration, other MPs attended, wearing rainbow masks
and bright colors to express their support for Poland’s LGBTQ community, whom Duda actively campaigned against.
In a campaign speech in June, Duda called LGBTQ rights an ideology “more destructive” than communism, prompting allegations of discrimination and hate speech from various international bodies, including the European Parliament.
Duda’s reelection bid has centered on “family rights and values,” and the belief that LGBTQ ideology undermines
traditional family roles between men and women.
When there is huge uproar related to the LGBTQ community a lot needs to be done and Poland will see the test of the time.
What is Oncor and its outage.
what is Oncor ?
More than 10 million Texas residents receive energy from Oncor through their
chosen retail electric provider. But we don’t just serve Texas; we live here too. Your
neighborhoods are our neighborhoods. That’s why we’re honored to deliver safe,
reliable, clean energy using innovative technologies and programs while also
providing exceptional customer service. Use this site to look out energy-saving tips
to manage your invoice, get help together with your energy service, and access
information about our education and safety programs.
History of oncor
With roots in Dallas Power & Light (DP&L), Texas Electric Service Company
(TESCO), and Texas Power & Light (TP&L), Oncor was created in 2007 when
Energy Future Holdings (EFH) purchased a majority stake in TXU and separated
Oncor from its other holdings by a ‘Ring-Fence’. This structure was meant to
protect Oncor customers from bankruptcy in other EFH holdings. They were privately
held by EFH, which declared bankruptcy in April 2014. last, Sempra Energy
completed its acquisition of EFH in March 2018. This transaction included EFH’s
approximate 80-percent indirect ownership interest in Oncor. The close of the
transaction creates a utility company with the foremost important U.S. customer
On November 9, 2017, Oncor and Sharyland closed a giant asset swap agreement.
For details on the agreement, read The Oncor/Sharyland Deal: How Customers Will
Benefit. for purchasers, this means that each one 54,000 retail Texas Sharyland
customers are transitioning to Oncor in early 2018 and may get to need advantage of more favorable electricity delivery rates. This includes the cities of Midland, Big
Spring, Stanton, Brady, Celeste, McAllen, and Greenville. All customers should be
transitioned by January 9, 2018 and may receive their last account with Sharyland
rates soon thereafter. Going forward, customers will see Oncor delivery rates on
why are charges so high?
As many Oncor customers know, TDU charges alone can add 1/3 or more to your
monthly bill because they depend upon what quantity electricity you utilize to power
your home. for example, the Oncor rate is 4.1867 cents per kWh. If you utilize 1000
kWh per month, you’ll be charged $41.87 to possess that 1000 kWh delivered to
your home. Add in Oncor’s customer charge of $3.42 and your total monthly delivery
charge roughly involves $45.29!
And that doesn’t even include the electricity you actually used!
While these charges aren’t welcome expenses, remember that Oncor is required by
the State of Texas to reliably operate and maintain a transmission and delivery
network that’s over 103,000 miles of power lines. This same network delivers power
to some 420 cities and towns. Keeping their an element of the ERCOT electric grid
running smoothly to supply nearly 10 million people with reliable energy altogether kinds of Texas weather is an intensive and expensive job.
Before Oncor can change its rates, it must file letter of invitation with the
final service Commision of Texas. The PUC updates rates (also called “tariffs”) twice
a year. Oncor and other TDUs can file rate change requests whenever they require
but all such changes must be first reviewed and approved by the commission
before they’re going to get in effect
how are Oncor rates set
here are multiple components included within the TDU delivery charges, with
fascinating names like
Energy Efficiency Cost Recovery Factor (EECRF)
Transmission Cost Recovery Factor (Rider TCRF)
Accumulated Deferred Federal tax (ADFIT) Credit
Transition Charges (Schedule TC2, TC3, SRC, and TC5)
Most REPs summarize these TDU delivery charges on your monthly electric bills.
you’ll not see this level of detail on your monthly residential bill.
The PUCT maintains official copies of the tariff documents on their computing
Why do the fees change so often ?
Each of the regulated utility companies is entitled to assemble 100% of their costs
from their rate payers, and receive a guaranteed rate of return. That’s because they
provide a critical public service: delivering electricity, maintaining the infrastructure,
and responding just just in case of an emergency.
The Public Utility Commission of Texas reviews and approves each utility’s rate
The items in each rate case may include costs from hurricane or storm recovery,
upgraded service equipment, or bond issues and financing costs for system
how to read Oncor meter
The meter face on your Smart Meter shows three separate rotating displays. Each
display flashes for five seconds. The displays include:
Status of your electricity service — is that the ability on or off? What does OPN and
Cumulative electric usage — utilized by your Retail Electric Provider in bill
Electric demand reading — a view for AEP Texas operational use only
New Digital Smart Meters
The Power Status Display tells you whether your electric service is on. you will see
OPN — this means your power is off.
CLS — this suggests your power is on.
Power Status Display
Cumulative Electric Usage Display
The Cumulative Electric Usage Display shows your cumulative usage in kilowatt-
hour (kWh) up to your current billing period. Your Retail Electric Provider uses this number to calculate your bill. you may also wish to hunt advice from this number if you’re keeping track of your kWh usage.
A kilowatt-hour is also a unit of electrical consumption up to the number of electricity
needed to burn ten, 100-watt light bulbs for one hour.
The Reference no 1 is exclusive to the Cumulative Electric Usage Display. The
meter number could also be a singular identifier for your meter.
Cumulative Electric Usage Display
Electric Demand Reading Display (For AEP Texas operational use only)
The Electric Demand Reading Display can be a kilowatt (kW) reading utilized by
AEP Texas. (It isn’t utilized in billing calculations.)
A kilowatt might be a unit of electrical consumption adequate 1,000 watts.
The Reference Number 21 is exclusive to the electrical Demand Reading Display.
The meter number may well be a novel identifier for your meter.
Neuralink: a deeper introspection
6th sense of Human beings the Neuralink- Neuralink is a medical device developed in order to track and enhance brain activity. Moreover, it is like a Fitbit that tracks brain activities like neuron spike. Elon Musk said that the device will also be able to help regain someone’s eyesight even if they’ve lost their optic nerve. He said that this technology will be able to fix everything that’s wrong with the brain. With complete symbiosis of the tech, humans will be able to interact with each other without the need to talk.
It will be surgically implanted into the brain and with it, one will be able to communicate with machines and control them. For now, human trials are not yet begun but would start at the end of 2020. Furthermore, it will also help study the electrical signals in the brain and help cure various medical problems. Before testing on humans, Neuralink prototypes have been tested on rodents, monkeys, pigs, etc.
Before peeping deeper into Neuralink let’s understand the human brain first.
There are 86 billion Neurons in our Brain. These neurons consist of 3 parts: a dendrite that receives the signal, a cell body that computes the received signal, and an axon that sends the signal out.
Neurons are connected through Synapses. The neurons of your brain connect each other to send and receive signals through axon-dendrite connections called synapses. Neurons communicate through Electric Signals. These signals can be recorded in the brain. Recordings from many neurons allow us to decode the information and it represents intended movements.
To understand how Neuralink works, we must understand how our brain sends information to different parts of our body using neurons. These neurons in our brain connect to form a large network and communicate using chemical signals called neurotransmitters.
This reaction generates an electric field to record the reactions. These electrodes translate electrical signals into an algorithm that a machine can read. This is how Neuralink will be able to read what one is thinking and find a way to talk to machines without uttering a single word. It’s all your thoughts and link’s action.
The neural implant will let you control a computer or mobile device anywhere you go. Micron-scale threads are inserted into areas of the brain that control movement. Each thread contains many electrodes and connects them to an implant, the Link.
It’s a sealed, implanted device that processes and stimulates, and transmits neural signals.
Each small and flexible thread contains many electrodes for detecting neural signals.
A compact inductive charger that connects to the implant wirelessly to charge the battery; same as a smart-watch or fit bit.
Precision Automated Neurosurgery.
The threads on the Link are extremely fragile and flexible that they can’t be inserted by a human hand. Hence neurosurgeons would be provided with a robotic system that can reliably and efficiently insert these threads. The robot would be able to insert the link within an hour without general anesthesia and the patient would be able to leave the hospital on the same day.
Robots will do everything from the incision, removing the skull, inserting electrodes, placing the device, and then closing it up. These robotic systems were tested on numerous pigs used to test the device. This system has no room for errors. The Head of the machine holds and guides the needle that performs the operation and contains a large number of cameras to capture the whole brain.
How Neuralink will help to overcome mental disorders?
The Neuralink aims to fight neurological disorders like Alzheimer’s disease, dementia and epilepsy, spinal cord injuries, and other medical problems. The link is expected to even fight with common anxiety and depression yet that’s not proven. By taking primitive measures of implementing the Neuralink slowly and gradually we can hope best for it. There are high abilities and possibilities that Link could help fight a large number of medical illnesses and aims to create an affordable solution for people who lack the essential needs of medical treatment. At its level best, it will help to control the number of suicides that end lives before help can be received.
For now, those goals are very much out of reach. Scientists need to learn far more about the brain and how it works for any of those ideas to become reality. The brain is still mysterious and the neurological causes of addiction and anxiety are still unclear.
Why is Elon Musk testing his implant on Pigs?
In August 2020, Elon Musk’s 3 pig trial got rearing spotlight. The Neuralink implant was tested on 3 pigs; on 1st with no implant, on 2nd with an implant for some days and later it was removed and the 3rd pig still has the implant in her brain. The experiment of 2nd pig was done to show that if someone wanted to remove the link, they should be able to live a happy and healthy life after that. 3rd pig’s implant is active to track down all neural movements and to list down moments of snout and sniffs.
Hiring engineers for neurotechnology firm Neuralink
Neuralink is almost done dealing with a neuroscience background. The chip is an electrical device that requires mechanical/software engineers to deal with. It would be easier for these engineers to sort out problems like processing, indictive charging, power mgmt, etc. Most importantly, great problem-solving skills, solving high-volume, high-reliability, low-cost production problems are especially valued.
In the end, let’s hope best for the future of brain interfaces and inventing new technologies that will expand our abilities, our community, and our world.